BL Lac Objects in the Synchrotron Proton Blazar Model

We calculate the spectral energy distribution (SED) of electromagnetic radiation and the spectrum of high energy neutrinos from BL Lac objects in the context of the Synchrotron Proton Blazar Model. In this model, the high energy hump of the SED is due to accelerated protons, while most of the low energy hump is due to synchrotron radiation by co-accelerated electrons. To accelerate protons to sufficiently high energies to produce the high energy hump, rather high magnetic fields are required. Assuming reasonable emission region volumes and Doppler factors, we then find that in low-frequency peaked BL Lacs (LBLs), which have higher luminosities than high-frequency peaked BL Lacs (HBLs), there is a significant contribution to the high frequency hump of the SED from pion photoproduction and subsequent cascading, including synchrotron radiation by muons. In contrast, in HBLs we find that the high frequency hump of the SED is dominated by proton synchrotron radiation. We are able to model the SED of typical LBLs and HBLs, and to model the famous 1997 flare of Markarian 501. We also calculate the expected neutrino output of typical BL Lac objects, and estimate the diffuse neutrino intensity due to all BL Lacs. Because pion photoproduction is inefficient in HBLs, as protons lose energy predominantly by synchrotron radiation, the contribution of LBLs dominates the diffuse neutrino intensity. We suggest that nearby LBLs may well be observable with future high-sensitivity TeV gamma-ray telescopes.Comment: 33 pages, 20 Figures. Astropart. Phys., accepte

On proton synchrotron blazar models: the case of quasar 3C 279

In the present work we propose an innovative estimation method for the minimum Doppler factor and energy content of the gamma-ray emitting region of quasar 3C 279, using a standard proton synchrotron blazar model and the principles of automatic photon quenching. The latter becomes relevant for high enough magnetic fields and results in spontaneous annihilation of gamma-rays. The absorbed energy is then redistributed into electron-positron pairs and soft radiation. We show that as quenching sets an upper value for the source rest-frame gamma-ray luminosity, one has, by neccessity, to resort to Doppler factors that lie above a certain value in order to explain the TeV observations. The existence of this lower limit for the Doppler factor has also implications on the energetics of the emitting region. In this aspect, the proposed method can be regarded as an extension of the widely used one for estimating the equipartition magnetic field using radio observations. In our case, the leptonic synchrotron component is replaced by the proton synchrotron emission and the radio by the VHE gamma-ray observations. We show specifically that one can model the TeV observations by using parameter values that minimize both the energy density and the jet power at the cost of high-values of the Doppler factor. On the other hand, the modelling can also be done by using the minimum possible Doppler factor; this, however, leads to a particle dominated region and high jet power for a wide range of magnetic field values. Despite the fact that we have focused on the case of 3C 279, our analysis can be of relevance to all TeV blazars favoring hadronic modelling that have, moreover, simultaneous X-ray observations.Comment: 12 pages, 11 figures, 1 Table, accepted for publication in MNRA

On the classification of flaring states of blazar

The time evolution of the electromagnetic emission from blazars, in particular high frequency peaked sources (HBLs), displays irregular activity not yet understood. In this work we report a methodology capable of characterizing the time behavior of these variable objects. The Maximum Likelihood Blocks (MLBs) is a model-independent estimator which sub-divides the light curve into time blocks, whose length and amplitude are compatible with states of constant emission rate of the observed source. The MLBs yields the statistical significance in the rate variations and strongly suppresses the noise fluctuations in the light curves. We apply the MLBs for the first time on the long term X-ray light curves (RXTE/ASM) of Mkn~421,Mkn~501, 1ES 1959+650 and 1ES 2155-304, which consist of more than 10 years of observational data (1996-2007). Using the MLBs interpretation of RXTE/ASM data, the integrated time flux distribution is determined for each single source considered. We identify in these distributions the characteristic level as well as the flaring states of the blazars. All the distributions show a significant component at negative flux values, most probably caused by an uncertainty in the background subtraction and by intrinsic fluctuations of RXTE/ASM. This effect interests in particular short time observations. In order to quantify the probability that the intrinsic fluctuations give rise to a false identification of a flare, we study a population of very faint sources and their integrated time flux distribution. We determine duty cycle or fraction of time a source spent in the flaring state of the source Mkn~421, Mkn~501, 1ES 1959+650 and 1ES 2155-304. Moreover, we study the random coincidences between flares and generic sporadic events such as high energy neutrinos or flares in other wavelengths.Comment: Accepted to A&

Neutrino Background Flux from Sources of Ultrahigh-Energy Cosmic-Ray Nuclei

Motivated by Pierre Auger Observatory results favoring a heavy nuclear composition for ultrahigh-energy (UHE) cosmic rays, we investigate implications for the cumulative neutrino background. The requirement that nuclei not be photodisintegrated constrains their interactions in sources, therefore limiting neutrino production via photomeson interactions. Assuming a $dN_{\rm CR}/dE_{\rm CR} \propto E_{\rm CR}^{-2}$ injection spectrum and photodisintegration via the giant dipole resonance, the background flux of neutrinos is lower than $E_\nu^2 \Phi_\nu \sim {10}^{-9} {\rm GeV} {\rm cm}^{-2} {\rm s}^{-1} {\rm sr}^{-1}$ if UHE nuclei ubiquitously survive in their sources. This is smaller than the analogous Waxman-Bahcall flux for UHE protons by about one order of magnitude, and is below the projected IceCube sensitivity. If IceCube detects a neutrino background, it could be due to other sources, e.g., hadronuclear interactions of lower-energy cosmic rays; if it does not, this supports our strong restrictions on the properties of sources of UHE nuclei.Comment: 7 pages, 3 figure

On photohadronic processes in astrophysical environments

We discuss the first applications of our newly developed Monte Carlo event generator SOPHIA to multiparticle photoproduction of relativistic protons with thermal and power law radiation fields. The measured total cross section is reproduced in terms of excitation and decay of baryon resonances, direct pion production, diffractive scattering, and non-diffractive multiparticle production. Non--diffractive multiparticle production is described using a string fragmentation model. We demonstrate that the widely used `$\Delta$--approximation' for the photoproduction cross section is reasonable only for a restricted set of astrophysical applications. The relevance of this result for cosmic ray propagation through the microwave background and hadronic models of active galactic nuclei and gamma-ray bursts is briefly discussed.Comment: 9 pages including 4 embedded figures, submitted to PAS

Temporal signatures of leptohadronic feedback mechanisms in compact sources

The hadronic model of Active Galactic Nuclei and other compact high energy astrophysical sources assumes that ultra-relativistic protons, electron-positron pairs and photons interact via various hadronic and electromagnetic processes inside a magnetized volume, producing the multiwavelength spectra observed from these sources. A less studied property of such systems is that they can exhibit a variety of temporal behaviours due to the operation of different feedback mechanisms. We investigate the effects of one possible feedback loop, where \gamma-rays produced by photopion processes are being quenched whenever their compactness increases above a critical level. This causes a spontaneous creation of soft photons in the system that result in further proton cooling and more production of \gamma-rays, thus making the loop operate. We perform an analytical study of a simplified set of equations describing the system, in order to investigate the connection of its temporal behaviour with key physical parameters. We also perform numerical integration of the full set of kinetic equations verifying not only our analytical results but also those of previous numerical studies. We find that once the system becomes `supercritical', it can exhibit either a periodic behaviour or a damped oscillatory one leading to a steady state. We briefly point out possible implications of such a supercriticality on the parameter values used in Active Galactic Nuclei spectral modelling, through an indicative fitting of the VHE emission of blazar 3C 279.Comment: 19 pages, 20 figures, accepted for publication in MNRA

Advanced process design for re-contouring using a time-domain dynamic material removal simulation

The repair of components often requires the removal of excess weld material. This removal is considered as re-contouring. Re-contouring processes have to be designed individually for each case of damage to fulfil the high quality requirements. Therefore, a prognosis of the machined surface topography is crucial. The material removal simulation introduced in this paper allows the prediction of process stability and surface topography for 5-axis ball end milling including dynamic effects. Different process strategies for re-contouring of Ti-6Al-4V welds are examined. It is shown, that selecting suitable process parameters can lead to high surface quality while maintaining productivity. © 2019 The Author(s)

Prediction of the Principal Stress Direction for 5-axis Ball End Milling

While regenerating damaged components, e.g. compressor blades, the removal of excess weld material called re-contouring often determines the surface integrity including the residual stress state. A load-specific residual stress state is beneficial for lifetime. This leads to the necessity to predict the resulting residual stress state after machining. The paper describes two models, which predict the principal stress direction as a residual stress characteristic for 5-axis ball nose end milling of Ti-6Al-4 V. One model uses process force components, the other is based on the microtopography of the workpiece, which is influenced by the kinematics of the process.DFG/Collaborative Research Centre/87